This subwoofer delivers an incredible SPL considering its very compact dimensions, and it can be easily used both flown and ground stacked.
The smart design of the feet allows the user to avoid the dull removal of the flying brackets: it is possible to remove the feet in few seconds and screw them again upside-down. In this way any contact between the flying brackets and the ground is avoided, as only the rubber feet will touch it. A practical X-over out can be used to feed signal straight to the line arrays modules, simplifying considerably the signal and power cabling.
DVA MS12 comes with the new generation of exclusive digital amplifiers Digipro G3, engineered by dBTechnologies and distinguished by an exceptionally lightweight design and a very remarkable efficiency.
An integrated USB B-type port on the DVA MS12 amplifier allows the user to access the complete telemetry of the sub, monitoring the status of the speaker, including total playing hours, temperatures and performances reports.
ACTIVE BASS REFLEX SUBWOOFER
INTEGRATED HARDWARE WITH INNOVATIVE QUICK-LOCK MECHANICS
700W RMS DIGIPRO® G3 CLASS-D AMPLIFIER
SWITCHED MODE POWER SUPPLY WITH AUTO-RANGE
DIGITAL CONTROLLER ON BOARD
DUAL FUNCTION FEET
-6 dB: 45 to 140 Hz -10 dB: 40 to 165 Hz
Low Frequency: 12.0" (30.5 cm)
Low Frequency: 3.0" (7.6 cm)
700 W SMPS with PSU auto-range (110 and 220 V)
100 to 120 VAC / 50 to 60 Hz: 4A 220 to 240 VAC / 50 to 60 Hz: 2A
Balanced: 20 kOhms Unbalanced: 10 kOhms
AD / DA: 24-bit / 48 kHz
X-Over frequency selection, phase selection (0 or 180°), outputs mode selection (link / X-over), mini-USB type B port (service data)
Dual active, RMS / peak, thermal
Low to High Frequency: 110 to 140 Hz
LF X-Over Out Slope: 24 dB / octave
Multiplex birch plywood with polyurea painting (rectangular shape)