Electro-Voice ELX112P 12" Live X Two-way Powered PA Cabinet.
The EV ELX112P is a 12” powered PA cabinet was designed to deliver powerful, tight, full-range sound in a ruggedly built, lightweight cabinet. Powered by a built-in 1000-watt class D amplifier perfectly matched to the speaker, the EV ELX112P can be used for either sound reinforcement or on-stage monitoring.
Under the hood: Beneath the 15mm plywood enclosure is a 12” woofer and 1.5” titanium diaphragm compression driver (tweeter). The bi-amplified design has a 24dB/Octave filter slope and transducer protection so a sudden overload shouldn’t cause any permanent damage in the heat of performance.
Connections and Switches: Flexible connectivity makes the EV ELX112P a dream to set up and turn loose on your audience. 2 separate inputs each with their own separate level control grace the rear input panel. Both channels sport an XLR/TRS combo jack and input 1 offers the addition of RCA L/R inputs. There’s a switchable line/mic mode on input 2 so you can set the proper impedance for the right application. The master volume control sits atop a switchable Normal/Boost control making the ELX112P useful for various environments. A selectable 100 Hz high pass filter can be switched for use with an external subwoofer and an XLR link output enables connection to another ELX112P.
Cool Useful Features: Additional features include a built-in pole mount (also designed to stack perfectly atop Live X Subwoofers), a front-mounted Power LED, indicator lights for power on and limit.
The Electro-Voice ELX112P is lightweight, packs a clear, powerful punch, is chock full of useful features and delivers EV quality at a price that wont empty your bank account. Whether used in a nightclub, house of worship, or at a family party, quality sound will fill the air and satisfy even the most critical ears
- ELX112 performance with self-amplification
- 50 Hz – 20 kHz frequency range
- Lightweight, cool-running 1000 W Class D amp
- Biamped with 24 dB/octave crossover
- Transducer protection
- Bypassable high-pass for external subwoofer
- XLR, TRS, and RCA connections
- Versatile gain, mixing, and processing controls
- Pre- or post-mix parallel outputs
9-ply, 15mm Plywood, Internally Braced, with Textured Paint