Engineered specifically for use with instrument amplifiers and other high-current equipment, the Furman P-1800 PF R offers a stable, protected and filtered low impedance powered supply for maximum performance of connected electronics. Furman's exclusive Power Factor provides a 45A peak current reservoir to minimize the detrimental effects of line impedance on high-current gear such as amplifiers and powered monitors. Clear Tone Technology provides additional line noise filtration tuned for instrument amplifiers for clean and consistent tone. Plus, equipment benefits from professional-level protection thanks to Furman's exclusive SMP and EVS technologies.
Power Factor Technology supplies 45+ amps of instantaneous reserve current, on demand, for power starved amplifiers.
Furman’s exclusive SMP technology provides the highest level of surge & spike protection available.
LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity.
Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.
LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.
Isolated outlet banks minimize inter-component interference and noise contamination.
Clear Tone Technology provides tuned filtering circuits engineered for instrument amplifiers to provide a clean and consistent tone.
Large digital voltmeter with discrete dimmer button displays incoming line voltage.
Three widely spaced outlets accommodate bulky AC power transformers.
15 Amp rating featuring a high inrush magnetic circuit breaker for added protection.
Nine total outlets (8 rear panel outlets and one front panel convenience outlet).
Rear panel BNC connector powers any standard gooseneck lamp for rear rack illumination.
Front panel USB convenience outlets allows you to charge most media devices or power a USB lamp.
15 amps @ 124 Volts
Captive 3/14 AWG, 10 ft. black cord with NEMA 15 plug
BNC Socket w/Switch:
12VAC 500MA maxx (lamp not included)
90 to 139 VAC
140 VAC Nominal
Spike Protection Mode:
Line to neutral, zero ground leakage
Spike Clamping Voltage:
188 VAC peak @ 3,000 Amps
Maximum Surge Current:
30 dB @ 2 kHz, 40 dB @ 10 kHz, 50 dB @ 20 kHz, 70 dB @ 100 kHz