The Shure ULXS4 Standard receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The feature set of the versatile receiver offers a direct path to full, clear audio signals, unencumbered and unattached.
Power On Indicator
"RF" Diversity Signal Indicators
Transmitted (TX) Audio Indicators
Receiving Antenna Indicator
Transmitter Battery Life Indicator
PS40, in-line power supply with locking DC connector.
MODE Button for Menu Display
SET Button for Saving Settings
Mic/Line level Switch
XLR and 1/4" outputs with level control
Space-saving 1/2 rack design
Type of Receiver
ULXS4 Rack/Table-Top Mount UHF Standard Diversity Receiver
RF Carrier Frequency Range
J1 / 554 to 590 MHz
25 Hz - 15 kHz, (Â±2 dB)
Greater Than 90 dB
Approx. Working Range
300' (100 m) NOTE: Actual working range depends on RF signal absorption, reflection, and interference
Type of Outputs
Balanced XLR - 22 Ohms, 1 = Ground, 2 = Hot, 3 = Cold Unbalanced 1/4" Phone Jack - 3k Ohms, Tip = Hot, Ring/Sleeve = Gnd (Both Outputs Feature: Voltage, Current and Phantom Power Protection)
14 - 18 VDC (negative ground), 550 mA External Power Supply - PS40, Included, Now with Locking DC Connector!
Battery Type/Approx. Life
Not Applicable, Unit Does Not Operate on Batteries
# Of Channels
Over 1400 User Selectable Frequencies
Yes, Power On Indicator, Diversity Signal Indicators and Audio Peak Indicator, Channel, Group, Transmitter Low Battery Warning.